*[DediGPU](https://dedigpu.com/) — Markdown mirror of [https://dedigpu.com/regions](https://dedigpu.com/regions) · updated 2026-09-02 · index for LLMs: [llms.txt](https://dedigpu.com/llms.txt) · everything: [llms-full.txt](https://dedigpu.com/llms-full.txt)*

Regions

# Four regions. Same hardware, same price. Pick by latency.

Cheap, clean power is a line of the cost sheet, which is why three of the four sites are in the Nordics and on the North Sea. Every card on the catalogue is deployable in every region below, at the same price, in under 5 minutes.

[See the servers](https://dedigpu.com/gpu) [How power sets the price](https://dedigpu.com/pricing#method)

- **4** regions
- **100 %** renewable in the three European sites
- **1.15** PUE assumed in every price
- **$0.052** per kWh, our contract rate

- ## Reykjavík, Iceland
  EU-North · REY · Iceland · EEA, GDPR applies
  Geothermal and hydro on a grid that is renewable end to end, in a climate that cools the halls with outside air all year. The lowest power line on the cost sheet, and the reason the whole catalogue is priced where it is. Two subsea routes to Europe, one to North America.
    - 100% geothermal + hydro
    - Free-air cooling year-round
    - 18 ms London · 40 ms New York
    - All 13 cards, 1× to 8×, clusters on request
- ## Helsinki, Finland
  EU-Nordic · HEL · Finland · EU, GDPR applies
  Wind and hydro on long contracts, free-air cooling ten months a year, and the best fibre into Central Europe of the Nordic sites. Where the eight-card Blackwell nodes and the InfiniBand fabrics for clusters live.
    - 100% wind + hydro
    - Free-air cooling 10 months a year
    - 27 ms Frankfurt · 36 ms London
    - All 13 cards, 1× to 8×, clusters on request
- ## Amsterdam, Netherlands
  EU-West · AMS · Netherlands · EU, GDPR applies
  On the Amsterdam exchange, single-digit milliseconds from London, Paris and Frankfurt. Rear-door liquid cooling for the densest racks. The region to pick when your users are in Western Europe and latency is the whole point.
    - 100% wind
    - Rear-door liquid cooling
    - 7 ms Frankfurt · 12 ms London
    - All 13 cards, 1× to 8×, clusters on request
- ## Singapore, Singapore
  APAC · SIN · Singapore · PDPA
  Direct-to-chip liquid cooling in a tropical climate, grid power with certified renewable certificates, and the shortest paths to Tokyo, Sydney, Mumbai and the rest of Asia-Pacific.
    - Grid + certified RECs
    - Direct-to-chip liquid cooling
    - 38 ms Tokyo · 45 ms Sydney
    - All 13 cards, 1× to 8×, clusters on request

Latency

## Typical round-trip times, in milliseconds.

Measured from our servers to well-connected hosts in each city, median over a month. Your route will differ; the ranking will not.

| From | Reykjavík | Helsinki | Amsterdam | Singapore |
| --- | --- | --- | --- | --- |
| **London** | 18 ms | 36 ms | 12 ms | 165 ms |
| **Frankfurt** | 30 ms | 27 ms | 7 ms | 160 ms |
| **Paris** | 28 ms | 35 ms | 10 ms | 165 ms |
| **New York** | 40 ms | 95 ms | 75 ms | 220 ms |
| **San Francisco** | 95 ms | 150 ms | 140 ms | 175 ms |
| **Dubai** | 110 ms | 100 ms | 105 ms | 90 ms |
| **Mumbai** | 130 ms | 110 ms | 120 ms | 55 ms |
| **Tokyo** | 150 ms | 130 ms | 145 ms | 38 ms |
| **Sydney** | 200 ms | 200 ms | 185 ms | 45 ms |

Bold is the nearest region for that city. Ports are 10, 25 or 100 Gbit/s depending on the card, unmetered, with $0 egress; see [networking](https://dedigpu.com/docs/networking).

What is identical everywhere

## The region changes the latency. Nothing else.

- ### The price
  One cost sheet per card, one price in four regions. The power line uses our blended contract rate, not the local tariff.
- ### The hardware
  The same nodes, the same chassis, the same NVMe and NICs. A B200 node in Singapore is the B200 node in Helsinki.
- ### The SLA
  99.9% per server, probed from two regions, credited ×10, published on the [status page](https://dedigpu.com/status) per region.
- ### The security
  Locked cages, escorted access, secure erase between tenants, no shared layer 2. [Trust and security](https://dedigpu.com/security).
- ### The clock
  Single-card servers in under 5 minutes, eight-card nodes in under fifteen, from local spares and images.
- ### The support
  One team, around the clock, the same for everyone, from the console.

Questions

## About regions.

**Is the price different per region?**

No. The cost sheet uses our blended power contract and every card carries the same price in all four regions. Pick by latency and jurisdiction.

**Can I move a server to another region?**

Not in place: a server is physical. Order the same configuration in the new region, copy your data across (egress is free, and the regions are on our backbone), then cancel the old one at the end of its term.

**Do you have private links between regions?**

The four regions are connected over our own transit with direct peering between the European sites. Traffic between your servers in different regions goes over the public ports, encrypted by you, at no charge.

**Which jurisdiction applies to my data?**

The law of the country where the server sits. Iceland, Finland and the Netherlands are in the EEA under the GDPR; Singapore under the PDPA. We answer only legally binding orders issued in that country, as the privacy policy explains.

## Pick the region, keep the price.

Every card, in every region, at cost. Root in under 5 minutes.

[See the servers](https://dedigpu.com/gpu) [Create an account](https://dedigpu.com/signup)